SpeedBox 3.3 for Giant SyncDrive Pro 2, SyncDrive Sport 2 with
RideControl DashUSD $256.23
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Compatible with:
SyncDrive Pro 2 (85 nm) + RideControl Go
SyncDrive Sport 2 (75 nm) + RideControl Dash
Not compatible with motors:
SyncDrive Sport, 70nm
SyncDrive Core
SyncDrive Life
SyncDrive (2017-2021), 80 nm
Product detailsWhat does this Tuning Kit do?
Reliable third-generation tuning chip for your Giant e-bikes with a SyncDrive motors (from 2022 onwards) and RideControl units
SpeedBox 3.3 tuning chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.
Note: The Speedbox App is an application specially designed for Speedbox B. Tuning products only. With a non-Bluetooth Speedbox product like this one, the Speedbox App is unavailable.
How does Speedbox Work?
The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:
Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]
You will activate the SpeedBox tuning directly on your e-bike’s control unit by activating the WALK assist function shortly. Do not activate while riding. Your e-bike display will show a value of 5.0 km/h (3.1 mph) and from now on you will be able to ride up to 50 km/h. You may change the default speed limit to any limit you want (up to 99 km/h), however, to minimize the risk of error codes, we recommend not to exceed 50 km/h.
To deactivate the tuning, activate the WALK assist function shortly again. Do not deactivate while riding. Your e-bike display will show a value of 2.5 km/h (1.6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the tuning installation.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of - + - + buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed of an electric assistance by switching modes three levels down and then three levels up. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1.5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2.5 corresponds with 25 km/h, 3.0 corresponds with 30 km/h, 5.0 corresponds with 50 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.
After finishing the ride, leave the bike on until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed. Then it is safe to turn off your bike and you can start looking forward to your next trip. Do not remove the display to lock the e-bike until SpeedBox finishes the "countdown" process.
In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.Is this Speedbox the right tuning kit for my bike?
Compatible with:
SyncDrive Pro 2 (85 nm) + RideControl Go
SyncDrive Sport 2 (75 nm) + RideControl Dash
Not compatible with motors:
SyncDrive Sport, 70nm
SyncDrive Core
SyncDrive Life
SyncDrive (2017-2021), 80 nm
Not compatible with: SpeedBox App
How to install this tuning kit?
When connecting the SpeedBox tuning kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated
Installation guide video:
https://www.youtube.com/watch?v=TrZVuaTyEPk&ab_channel=SpeedBoxTuning
Installation Guide PDF
https://cdn.shopify.com/s/files/1/0051/1515/0434/files/sb33-g-manual-en.pdf?v=1738322920
Important legal note
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.
The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
SpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!
If You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team
SyncDrive Pro 2 (85 nm) + RideControl Go
SyncDrive Sport 2 (75 nm) + RideControl Dash
Not compatible with motors:
SyncDrive Sport, 70nm
SyncDrive Core
SyncDrive Life
SyncDrive (2017-2021), 80 nm
Product detailsWhat does this Tuning Kit do?
Reliable third-generation tuning chip for your Giant e-bikes with a SyncDrive motors (from 2022 onwards) and RideControl units
SpeedBox 3.3 tuning chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.
Note: The Speedbox App is an application specially designed for Speedbox B. Tuning products only. With a non-Bluetooth Speedbox product like this one, the Speedbox App is unavailable.
How does Speedbox Work?
The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:
Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]
You will activate the SpeedBox tuning directly on your e-bike’s control unit by activating the WALK assist function shortly. Do not activate while riding. Your e-bike display will show a value of 5.0 km/h (3.1 mph) and from now on you will be able to ride up to 50 km/h. You may change the default speed limit to any limit you want (up to 99 km/h), however, to minimize the risk of error codes, we recommend not to exceed 50 km/h.
To deactivate the tuning, activate the WALK assist function shortly again. Do not deactivate while riding. Your e-bike display will show a value of 2.5 km/h (1.6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the tuning installation.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of - + - + buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed of an electric assistance by switching modes three levels down and then three levels up. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1.5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2.5 corresponds with 25 km/h, 3.0 corresponds with 30 km/h, 5.0 corresponds with 50 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.
After finishing the ride, leave the bike on until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed. Then it is safe to turn off your bike and you can start looking forward to your next trip. Do not remove the display to lock the e-bike until SpeedBox finishes the "countdown" process.
In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.Is this Speedbox the right tuning kit for my bike?
Compatible with:
SyncDrive Pro 2 (85 nm) + RideControl Go
SyncDrive Sport 2 (75 nm) + RideControl Dash
Not compatible with motors:
SyncDrive Sport, 70nm
SyncDrive Core
SyncDrive Life
SyncDrive (2017-2021), 80 nm
Not compatible with: SpeedBox App
How to install this tuning kit?
When connecting the SpeedBox tuning kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated
Installation guide video:
https://www.youtube.com/watch?v=TrZVuaTyEPk&ab_channel=SpeedBoxTuning
Installation Guide PDF
https://cdn.shopify.com/s/files/1/0051/1515/0434/files/sb33-g-manual-en.pdf?v=1738322920
Important legal note
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.
The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
SpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!
If You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team
Price type
IN STOCK
OUT STOCK
.
